System-S Serial RS232 up to 5 meters to RS422 (up to approx. 1200 meters) converter

Versatile serial port connection:

The System-S Serial RS232 to RS422 converter enables the connection of different serial ports and thus opens up new possibilities for data transmission over different distances.

Specifications according to EIA-232 to EIA-422:

This converter complies with EIA-232 to EIA-422 specifications and features an external power connector. The interface consists of a DB-9 (female) connector and a DB-9 (male) connector. It operates asynchronously in full-duplex or half-duplex mode with automatic selection, requiring no jumper settings. Transmission occurs over double-insulated cables. The transfer speed is between 300 and 115.3 Kbps. The converter is suitable for use in temperatures from -25 to 70 degrees Celsius and at humidity levels from 0% to 95%. The transmission distance is 1200 meters for RS-422 and 5 meters for RS-232.

PIN Assignment:

• DB9 Female Input:

  • Protected, Receive Data: SIN (RXD)
  • Shipment data: SOUT (TXD)
  • Data end preparation: DTR
  • Signal Ground: GND
  • Data provision: DSR
  • Request to send: RTS
  • Remote Sending: CTS
  • Ringing instructions: R1

• DB9 Male Output:

  • RS-422 Full Duplex, T/R+ / Transmit (A+)
  • T/R - / Send (B-)
  • RXD + / Receive (A+)
  • RXD - / Receive (B-)
  • GND / ground wire
  • VCC / +5V standby power supply

Scope of delivery:

Included in delivery is the Serial RS232 to RS422 converter in a frustration-free package.

This converter from System-S allows you to connect serial ports easily and effectively, expanding the range and versatility of your data transmission.

- System-S Serial RS232 (up to approx. 5 meters) to RS422 (up to approx. 1200 meters) converter

- With this converter you can connect different serial ports.

- Conforms to EIA-232 to EIA-422 specifications (with external power supply). Interface: DB-9 (female) connector and DB-9 (male) connector. Operation: Asynchronous full-duplex, half-duplex differential transmission with automatic selection, no jumper setting required. Transmission via double-insulated cable. Transfer rate: 300 - 115.3 Kbps. Operating temperature: -25 ~ 70 degrees Celsius, 0% ~ 95% humidity. Transmission distance: 1200 meters (RS-422 terminal); 5 meters (RS-232 terminal).

- PIN assignment. DB9 Female Input: (Protected, Receive data: SIN (RXD), Send data: SOUT (TXD), Data Terminal Preparation: DTR, Signal Ground: GND, Data Preparation: DSR, Request to send: RTS, Remove sending: CTS, Rign Instructions: R1). DB9 Male Output: (RS-422 Full Duplex, T/R + / Send (A+), T/R - / Send (B-), RXD + / Receive (A+), RXD - / Receive (B-), GND / Ground Line, VCC / +5V stand-by power input).

- Scope of delivery: Serial RS232 to RS422 converter, (frustration-free packaging)